Call (310) 372-3992

Toyota

/Toyota

We Service and Repair All Toyota Cars and Trucks

2011 Toyota RAV4

2019-10-23T22:02:16+00:00

Toyota RAV4

Mileage
92,072
Service Date
10/22/2019
Services Performed
  • 55 point maintenance inspection Comprehensive visual bumper to bumper, 55 point vehicle isnpectioin. Does not include any specific testing or removal of any components for inspection or diagnosis. Additional inspection and diagnosis may be required with
  • Check brake fluid for moisture and contamination. Inspect all hydraulic line and hoses. Inspect calipers and wheel cylinders. Inspect master cylinder and cap. Flush entire brake system including master cylinder, calipers, wheel cylinders until clean.
  • Customer states: brakes squeek
  • R&R Front brake pad and shim set, clean and lube caliper slider and hardware kit, R&R Front brake rotors, test drive.
 
Adam M. gave our service a 5 star review on 10/22/2019
2011 Toyota RAV4 2019-10-23T22:02:16+00:00

2010 Toyota RAV4

2019-08-10T22:01:36+00:00

Toyota RAV4

Mileage
106,102
Service Date
8/5/2019
Services Performed
  • 1. Change engine oil and filter 2. Check and top off fluids 3. Check tire pressure 4. End to end maintenace inspection 5. Rotate tires if needed
  • TIRE PRESSURE SET TO FACTORY SPECS
  • R and R Front brake pad and shim set, clean and lube caliper sliders and hardware, replace front rotors.
  • Check brake fluid for moisture and contamination. Inspect all hydraulic line and hoses. Inspect calipers and wheel cylinders. Inspect master cylinder and cap. Flush entire brake system including master cylinder, calipers, wheel cylinders until clean.
 
Kimberly R. gave our service a 5 star review on 8/9/2019
2010 Toyota RAV4 2019-08-10T22:01:36+00:00

2007 Toyota Camry

2019-07-27T22:00:54+00:00

Toyota Camry

Mileage
100,391
Service Date
7/24/2019
Services Performed
  • 1. Change engine oil and filter 2. Check and top off fluids 3. Check tire pressure 4. End to end maintenace inspection 5. Rotate tires if needed
  • 1. Change engine oil and filter 2. Check and top off fluids 3. Check tire pressure 4. End to end maintenace inspection 5. Rotate tires if needed
  • TIRE PRESSURE SET TO FACTORY SPECS
  • WATER PUMP – Remove and Replace – CE,LE,SE,XLE,In-Line4
  • THERMOSTAT and /OR GASKET – Remove and Replace – CE,Hybrid,LE,SE,XLE,In-Line4
  • Inspect hoses and clamps. Pressure test cooling system. Flush engine, radiator, and heater core in both directions. Bring antifreeze to -35 degrees. PH balance coolant to between 9.8 to 10.5. Check thermostat and electric cooling fan operation. Chec
  • R and R Rear brake pad and shim set, clean and lube caliper sliders and hardware, R and R Rear brake rotors, test drive and advise.
  • Check brake fluid for moisture and contamination. Inspect all hydraulic line and hoses. Inspect calipers and wheel cylinders. Inspect master cylinder and cap. Flush entire brake system including master cylinder, calipers, wheel cylinders until clean.
 
Emi K. gave our service a 5 star review on 7/26/2019
2007 Toyota Camry 2019-07-27T22:00:54+00:00